Filter
Top Products
Black plate (108,1)
Model "NAV2-N" EDITED: 2009/ 7/ 17
While the map scale is being changed, the route
preview is temporarily stopped.
Confirming by simulation
1. Highlight [Simulation] and press <ENTER>.
2. Highlight the pre ferred key and push
<ENTER>.
:Pauses the simulation.
:Resumes the simulation.
:Ends the simulation.
3. Push <MAP> to cancel the simulation and
return to the current location map screen.
INFO:
During simulation, you can change the map
scale by pushing <ZOOM IN> or <ZOOM
OUT>.
While the map scale is being changed, the
simulation is temporarily stopped.
SEARCHING FOR A DETOUR ROUTE
TAKING TRAFFIC INFORMATION INTO
CONSIDERATION
When a serious traffic event occurs on the route,
or if the system finds a faster route, a detour alert
will pop up automatically. If you miss the
automatic alert, you can also manually search
for a detour.
1. Push <ROUTE>.
2. Highlight [Traffic Detour] and push
<ENTER>.
3. When the detour search is successful,
detailed information about the detour route
(left screen) and the comparison screen of
the two routes (right screen) are displayed.
&
1
Yellow: Original route
&
2
Pink: Detour route
&
3
The change of distance and estimated
travel time to destination when the
detour route is taken.
4. If you want to accept the suggested detour
route, select [Yes], and then push
<ENTER>.
INFO:
. If no route is set, or “Use Traffic for Route
Calculation” is turned off, this function
cannot be operated.
5-12 Route guidance