Filter
Top Products
INSTALLING TOP TETHER STRAP
First, secure the child restraint with the LATCH
lower anchors (rearoutboard seat positions only)
or the seat belt, as applicable.
1. Flip up the anchor cover
᭺
1
from the anchor
point which is located directly behind the
child seat.
2. Position the top tether strap over the top of
the seatback
᭺
2
.
3. Secure the tether strap to the tether anchor
point on the rear parcel shelf
᭺
3
.
4. Refer to the appropriate child restraint in-
stallation procedure steps in this section
before tightening the tether strap.
If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.
BOOSTER SEATS
Precautions on booster seats
WARNING
If abooster seat andseat belt arenot used
properly, the risk of a child being injured
in a sudden stop or collision greatly
increases:
– Make sure the shoulder portion of
the belt is away from the child’s face
and neck and the lap portion of the
belt does not cross the stomach.
– Make sure the shoulder belt is not
behind the child or under the child’s
arm.
– A booster seat must only be installed
in a seating position that has a
lap/shoulder belt.
Booster seats of various sizes are offered by
several manufacturers. When selecting any
booster seat, keep the following points in mind:
● Choose only a booster seat with a label
certifying that it complieswith Federal Motor
Vehicle Safety Standard 213 or Canadian
Motor Vehicle Safety Standard 213.
● Check the booster seat in your vehicle to be
sure it is compatible with the vehicle’s seat
and seat belt system.
LRS0798 LRS0455
Safety—Seats, seat belts and supplemental restraint system 1-39