Nissan 2010 Altima Automobile User Manual


 
Headlight beam select
1
To select the high beam function, push the
lever forward. The high beam lights come on
and the
light illuminates.
2
Pull the lever back to select the low beam.
3
Pulling and releasing the lever flashes the
headlight high beams on and off.
Battery saver system
If the ignition switchis placed in the OFF position
while the headlight switch is in the
or
position, the headlights will turn off after
5 minutes.
CAUTION
Even though the battery saver feature au-
tomatically turns off the headlights after a
period of time, you should turn the head-
light switch to the OFF position when the
engine is not running to avoiddischarging
the vehicle battery.
DAYTIME RUNNING LIGHT SYSTEM
(Canada only)
The headlights automatically illuminate at a re-
duced intensity when the engine is started with
the parking brake released. The daytime running
lights operate with the headlight switch in the
OFF position or in the
position. Turn the
headlight switch to the
position for full
illumination when driving at night.
Ifthe parkingbrake isapplied beforethe engineis
started, the daytime running lights do not illumi-
nate. The daytime running lights illuminate when
the parking brake is released. The daytime run-
ning lights will remain on until the ignition switch
is placed in the OFF position.
WARNING
When the daytime running light system is
active, tail lights on your vehicle are not
on. It is necessary at dusk to turn on your
headlights. Failure to do so could cause
an accident injuring yourself and others.
LIC1087
Instruments and controls 2-31