Filter
Top Products
TROUBLESHOOTING GUIDE
The system should respond correctly to all voice
commands without difficulty. If problems are en-
countered, followthe solutions givenin this guide
for the appropriate error.
Where the solutions are listed by number, try
each solution in turn, starting with number one,
until the problem is resolved.
Symptom/error message Solution
Displays “COMMAND NOT RECOG-
NIZED”or the systemfails tointerpret
the command correctly.
1. Ensure that the commandformat isvalid, see“Standard Mode commandlist” or “Alternate Command Mode command list”in this
section.
2. Speak clearly using your normalspeech patternand ata levelappropriate to theambient noiselevel.
3. Ensure that the ambient noiselevel isnot excessive,for example,windows open ordefrost on.
NOTE:
If it is too noisy to use the phone, it is likely that voice commands will not be recognized.
The system consistently selects the
wrong voicetag in the phonebook.
1. Ensure that the voicetagrequested matcheswhat wasoriginally stored. See“Bluetoothா Hands-FreePhone Systemwith Navigation
System”in this section.
2. Replace one of the voicetagsbeing confusedwith adifferent voicetag.
Monitor, climate, audio, phone and voice recognition systems 4-139