● 10 Key Search
Select the “10 Key Search” key to open the
number entry screen. Input the number you
want to search for and the specified file or
folder will be played.
● Display
Adjust the image quality of the screen.
● DRC
DRC (Dynamic Range Compression) auto-
matically adjusts the soundtrack volume
level to maintain a more even sound to the
speakers.
● Audio
Choose the preferredlanguage of the audio.
● Subtitle
Choose the preferred language of the sub-
titles.
● Display Mode
Choose between the “Normal”, “Wide”,
“Cinema” or “Full” display modes.
iPodா* PLAYER OPERATION
WITHOUT NAVIGATION SYSTEM (if
so equipped)
Connecting iPodா
To connect an iPodா to the vehicle so that the
iPodா can be controlled with the audio system
controls and display screen, use the USB jack
located in the center console. Open the protec-
tive cover
᭺
1
on the USB jack in the center
console. Then connect the iPodா-specific end of
the cable to the iPodா and the USB end of the
cableto theUSB jackon thevehicle. IfyouriPodா
supports charging via a USB connection, its bat-
tery will be charged while connected to the ve-
hicle with the ignition switch in the ACC or ON
position.
While connected to the vehicle, the iPodா can
only be operated by the vehicle audio controls.
Todisconnect theiPodா fromthe vehicle, remove
the USB end of the cable from the USB jack on
the vehicle, then remove the cable from the
iPodா.
*iPodா is a trademark of Apple Inc., registered in
the U.S. and other countries.
Compatibility
The following models are compatible:
● iPodா 5th Generation version 1.2.1
● iPodா Classic - version 1.1
● iPodா Touch - version 2.1.0
● iPodா Nano - 1st generation version 1.3.1
● iPodா Nano - 2nd generation version 1.1.3
● iPodா Nano - 3rd generation version 1.0.2
Make sure that your iPodா firmware is updated to
the version indicated above.
WHA1530
4-72 Monitor, climate, audio, phone and voice recognition systems