Filter
Top Products
INSTRUMENT BRIGHTNESS
CONTROL
The instrument cluster illuminates when the igni-
tion switch is placed in the ON position.
The instrumentbrightness controloperates when
the headlight control switch is in the
AUTO,
or position.
Turn the control left or right to adjust the bright-
ness of the instrument panel lights when driving
at night.
TURN SIGNAL SWITCH
Turn signal
᭺
1
Move the lever up or down to signal the
turning direction. When the turn is com-
pleted, the turn signals cancel automatically.
Lane change signal
᭺
2
Tosignal a lanechange, move the lever upor
down to the point where the indicator light
begins to flash, but the lever does not latch.
FOG LIGHT SWITCH (if so equipped)
Toturn the fog lightson, turn the headlight switch
to the
position, then turn the fog light
switch to the
position.
Toturn the fog lightson with the headlight switch
in the AUTO position (if so equipped), the head-
lights must be on, then turnthe fog light switch to
the
position.
To turn the fog lights off, turn the fog light switch
to the OFF position.
The headlights must be on and the low beams
selected for the fog lights to operate. The fog
lights automatically turn off when the high beam
headlights are selected.
LIC1066 LIC1088 LIC1089
2-32 Instruments and controls