ENGINE 6A1 (E-W) Workshop Manual
6A1
ENGINE (E-W) –
Water Pump and Water Pipe
11A-7-3
4
th
A
◄
►
INSTALLATION SERVICE POINTS
SEALANT APPLICATION TO WATER PUMP
Specified sealant:
Mitsubishi Genuine Part No. MD970389 or equivalent
6AE0067
3 mm diameter
bead sealant
page added here.
►
B
◄
WATER PIPE / O-RING INSTALLATION
(1) Wet the O-ring (with water) to facilitate assembly.
Caution
•
Keep the O-ring free of oil or grease.
•
Secure the water pipe after the thermostat housing
has been installed.
►
C
◄
SEALANT APPLICATION TO WATER OUTLET FITTING
3 mm diameter
bead sealant
Specified sealant:
Mitsubishi Genuine Part No. MD970389 or equivalent
6AE0068
l lJigg e va ve
►
D
◄
THERMOSTAT INSTALLATION
(1) Install the thermostat so that the jiggle valve will be located in
the thermostat housing as shown.
6AE0069
6AE0070
►
E
◄
SEALANT APPLICATION TO ENGINE COOLANT
TEMPERATURE SENSOR
Specified sealant:
3M Nut locking Part No. 4171 or equivalent
3