6A1 ENGINE (E-W) -
Oil Pump Case and Oil Pan
11A-13-3
6AE0087
MD998727
6AE0091
REMOVAL SERVICE POINT
G
A
+
OIL PAN REMOVAL
(1) Knock the special tool deeply between the oil pan and
the cylinder block.
(2) Hitting the side of the special tool, slide the special tool
along the oil p an to remove it.
INSTALLATION SERVICE POINTS
+
A
G
INNER ROTOR / OUTER ROTOR INSTALLATION
(1) Apply engine oil to the rotors. Then, install the rotors
ensuring that the alignment dots made at disassembly
are properly aligned.
3 mm diameter
6AE0092
bead sealant
6AE0093
MD998717
+
B
G
SEALANT APPLICATION TO OIL PUMP CASE
Specified sealant:
Mitsubishi Genuine Part No. MD970389 or
equivalent
+
C
G
OIL SEAL INSTALLATION
(1) Apply engine oil to the oil seal lip.
Using t he special tool, knock the oil seal into the oil pump
case.
K
Mitsubishi Motors Corporation Feb. 1997 PWEE9622