Filter
Top Products
11A-6-2
6A1 ENGINE (E-W) -
Ignition System
REMOVAL AND INSTALLATION <MIVEC>
1
2
3
25 Nm
1.0 Nm
Removal steps
1. Spark plug cable
2. Ignition coil
3. Spark plug
6AE0151
Alignment mark
INSTALLATION SERVICE POINT
+
A
G
DISTRIBUTOR INSTALLATION
(1) Turn the crankshaft clockwise to bring the No. 1 cylinder
piston to the compression stroke top dead center.
(2) Align the mark on the distributor housing with the mark
on the coupling.
(3) Install th e distributor while aligning the coupling key with
the keyway in the camshaft end.
K
Mitsubishi Motors Corporation Feb. 1997 PWEE9622