Filter
Top Products
58
Getting started
Driving
Single wipe
̈ Press the combination switch briefly in
direction of arrow 1 (
୴ page 58) to
the resistance point.
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid
̈ Press the combination switch in direc-
tion of arrow 1 (
୴ page 58) past the
resistance point.
The windshield wipers operate with
washer fluid.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system*”
(
୴ page 302).
Problems while driving
The engine runs erratically and misfires
ț An ignition cable may be damaged.
ț The engine electronics may not be
operating properly.
ț Unburned gasoline may have entered
the catalytic converter and damaged it.
̈ Give very little gas.
̈ Have the problem repaired by an au-
thorized Mercedes-Benz Center as
soon as possible.
The coolant temperature is above
248°F (120°C)
The coolant is too hot and is no longer
cooling the engine.
̈ Stop the vehicle as soon as possible
and turn off the engine. Allow engine
and coolant to cool off.
̈ Check the coolant level and add cool-
ant if necessary (
୴ page 300).
In case of accident
If the vehicle is leaking gasoline:
̈ Do not start the engine under any
circumstances.
̈ Notify local fire and/or police
authorities.
If the extent of the damage cannot be
determined:
̈ Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.
If no damage can be determined on the
ț Major assemblies
ț Fuel system
ț Engine mount
̈ Start the engine in the usual manner.
i
To prevent smears on the windshield or
noisy/chattering wiper blades, wipe with
windshield washer fluid every now and then even
when it is raining.