Filter
Top Products
139
Controls in detail
Control system
Instrument cluster submenu
Access the
Instr. cluster
submenu via
the
Settings...
menu. Use the
Instr.
cluster
submenu to change the instru-
ment cluster display settings.
The following functions are available:
Selecting digital speedometer display
mode
̈ Move the selection marker with
button æ or ç to the
Instr.
cluster
submenu.
̈ Press button j or k repeatedly
until the message
Display unit
Digital speedometer
appears in the
multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to set the
speedometer unit to
km
or
miles
.
Selecting language
̈ Move the selection marker with
button æ or ç to the
Instr.
cluster
submenu.
̈ Press button j or k repeatedly
until the message
Language
appears in
the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
the desired language to be used for the
multifunction display messages.
Function Page
Selecting speedometer display
mode
139
Selecting language 139
Selecting display (speed display
or outside temperature) for
status indicator
140