Filter
Top Products
297
Operation
Engine compartment
One of the following messages will
subsequently appear in the multifunc-
tion display:
ț
Engine oil level
OK
ț
Add 1.0 qt.
(Canada:
1.0 liter
)
to reach max. oil level
ț
Add 1.5 qts.
(Canada:
1.5 liters
)
to reach max. oil level
ț
Add 2.0 qts.
(Canada:
2.0 liters
)
to reach max. oil level
̈ If necessary, add engine oil.
For adding engine oil, see “Adding
engine oil” (
୴ page 299).
For more information on engine oil, see
“Fuels, coolants, lubricants, etc.”
(
୴ page 443).
Other display messages
If the ignition is not switched on, the fol-
lowing message will appear:
Turn on ignition
to see engine oil level
̈ Switch on the ignition (୴ page 37).
If you see the message:
Observe waiting time
̈ If engine is at operating temperature,
wait 5 minutes before repeating check
procedure.
̈ If engine is not at operating tempera-
ture yet, you must wait 30 minutes
before checking oil.
If you see the message:
Cannot check engine
level with engine on
̈ Turn off the engine.
̈ If the engine is at operating tempera-
ture, wait 5 minutes before checking
oil.
̈ If the engine is not at operating
temperature yet, you must wait
30 minutes before checking oil.
i
If you want to interrupt the checking
procedure, press button k or j on the
multifunction steering wheel (
୴ page 122).
i
If you want to interrupt the checking
procedure, press button k or j on the
multifunction steering wheel (
୴ page 122).