Filter
Top Products
409
Practical hints
Flat tire
̈ Jack up the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the
ground.
Removing the wheel
4 Alignment bolt
̈ Unscrew the upper-most wheel bolt
and remove.
̈ Replace this wheel bolt with alignment
bolt 4 supplied in the vehicle tool
kit (
୴ page 382).
̈ Remove the remaining bolts.
̈ Remove the wheel.
Mounting the spare wheel
1 Wheel bolt for light alloy rims
2 Wheel bolt for spare wheel with
collapsible tire (located under plastic
cover on the outside of spare wheel
rim)
Warning! G
The jack is intended only for lifting the
vehicle briefly for wheel changes. It is not
suited for performing maintenance work
under the vehicle.
ț Never start the engine when the vehicle
is raised.
ț Never lie down under the raised vehicle.
!
Do not place wheel bolts in sand or dirt. This
could result in damage to the bolt and wheel hub
threads.
Warning! G
Inflate collapsible tire only after the wheel is
properly mounted.
Inflate the collapsible tire using the electric
pump (
୴ page 411) before lowering the
vehicle.