Filter
Top Products
137
Controls in detail
Control system
̈ Press the reset button J on the
instrument cluster (
୴ page 26) for
approximately 3 seconds.
The request to press the reset
button J once more to confirm
appears in the multifunction display.
̈ Press the reset button J once more.
The functions of all submenus will be
reset to the factory settings.
The message
Reset to factory
settings
appears in the multifunction
display.
Submenus in the Settings menu
̈ Press button è or ÿ repeatedly
until the
Settings...
menu appears in
the multifunction display.
̈ Press button j.
In the multifunction display you see the
collection of the submenus. There are
more submenus than can be simulta-
neously displayed.
̈ Press button ç.
The selection marker moves to the next
submenu.
̈ Scroll up with button æ, and scroll
down with button ç.
̈ With the selection marker on the
desired submenu, use the j button
to access the individual functions
within that submenu.
̈ Once within the submenu, use the
j button to move to the next
function or the k button to move
to the previous function within that
submenu.
̈ Use buttons æ or ç to change
the settings of the respective function.
i
Your individual settings will not be reset un-
less you confirm the action by pressing the reset
button J again.
After 5 seconds the
Settings...
menu reap-
pears in the multifunction display.