Filter
Top Products
37
Getting started
Unlocking
̈ Press unlock button Œ on the
SmartKey.
ț All turn signal lamps flash once.
ț An acoustic warning sounds once
(if equipped and feature activated).
For more information, see “Factory
setting” (
୴ page 96).
ț The locking knobs in the doors
move up.
ț The anti-theft alarm system is
disarmed.
̈ Enter the vehicle and insert the
SmartKey in the starter switch.
For more information, see “SmartKey”
(
୴ page 94).
Starter switch positions
SmartKey
Starter switch
0 For removing the SmartKey
The steering is locked when the
SmartKey is removed from the starter
switch.
1 Power supply for some electrical con-
sumers, such as seat adjustment*
2 Ignition (power supply for all electrical
consumers) and driving position
All lamps (except high beam headlamp
indicator lamp and turn signal indicator
lamps unless activated) in the instru-
ment cluster come on. If a lamp in the
instrument cluster fails to come on
when the ignition is switched on, have
it checked and replaced if necessary.
If a lamp in the instrument cluster re-
mains on after starting the engine or
comes on while driving, see “Lamps in
instrument cluster” (
୴ page 346).
3 Starting position
i
Without the antenna on the left rear side
of the vehicle installed, the SmartKey signaling
range is considerably reduced.
Hold the SmartKey in close proximity towards
the antenna base when locking or unlocking
the vehicle.
Warning! G
When leaving the vehicle, always remove the
SmartKey from the starter switch, take it
with you, and lock the vehicle. Do not leave
children unattended in the vehicle, or with
access to an unlocked vehicle.
A child’s unsupervised access to a vehicle
could result in an accident and/or serious
personal injury.