Filter
Top Products
186
Controls in detail
Automatic climate control*
Reactivating
̈ Switch on the ignition (୴ page 37).
̈ Press button ´ (୴ page 184) again.
The previous settings are once again in
effect.
or
̈ Press button U (୴ page 184).
The indicator lamp on the button
comes on. Air volume and air dis-
tribution are adjusted automatically.
Operating the climate control system
in automatic mode
Activating
̈ Press button U (୴ page 184) while
the engine is running.
The indicator lamp on the button
comes on. The air volume and air dis-
tribution are adjusted automatically.
̈ Use temperature controls 4 and 6
or b and c (
୴ page 184) to sepa-
rately adjust the air temperature on
each side of the passenger com-
partment.
The temperature of the vehicle interior
is adjusted automatically.
Deactivating
̈ Press button U (୴ page 184) again.
The indicator lamp on the button goes
out. The air volume changes to level 2
and the air distribution changes
to b. Automatic control of air
volume and air distribution is switched
off.
Setting the temperature
Use temperature controls 4 and c for
the driver’s side or 6 and b for the
passenger side (
୴ page 184) to separately
adjust the air temperature on each side of
the passenger compartment. You should
raise or lower the temperature setting in
small increments, preferably starting
at 72°F (22°C). The automatic climate
control will adjust to the set temperature
as fast as possible.
i
When operating the automatic climate
control system in automatic mode, you will only
rarely need to adjust the temperature, air volume
and air distribution.
In automatic mode, cooling with dehumidify is
switched on. This function can be switched off if
necessary.