Filter
Top Products
49
Getting started
Driving
1 Loop for seat belt guidance
2 Latch plate
3 Release button
4 Buckle
̈ With a smooth motion, pull the seat
belt from the seat belt outlet.
̈ Place the shoulder portion of the seat
belt across the top of your shoulder
and the lap portion across your hips.
̈ Push latch plate 2 into buckle 4 until
it clicks.
̈ If necessary, tighten the lap portion to
a snug fit by pulling shoulder portion
up.
For more information, see “Safety guide-
lines for the seat belt, emergency tension-
ing device and air bag” (
୴ page 68).
Warning! G
Never let more people ride in the vehicle
than there are seat belts available. Be sure
everyone riding in the vehicle is correctly
restrained with a separate seat belt. Never
use a seat belt for more than one person at
a time.
Warning! G
Never ride in a moving vehicle with the seat
backrest in an excessively reclined position
as this can be dangerous. You could slide
under the seat belt in a collision. If you slide
under it, the seat belt would apply force at
the abdomen or neck. That could cause
serious or even fatal injuries. The seat back-
rest and seat belt provide the best restraint
when the wearer is in a position that is as
upright as possible and the seat belt is
properly positioned on the body.
Warning! G
Read and observe the additional warning no-
tices printed in the “Safety and Security”
section (
୴ page 68) and (୴ page 76).