Filter
Top Products
201
Controls in detail
Audio system
Manual tuning
̈ Select desired waveband.
̈ Press G or H button for
approximately 3 seconds.
̈ Press button repeatedly until the
desired frequency has been reached.
Step-by-step station tuning takes place
in ascending or descending order. Each
time the button is pressed, the radio
tunes further by 0.2 MHz. During
manual tuning, the radio is muted.
Automatic seek tuning
̈ Select desired waveband.
̈ Press G or H button briefly.
The radio will tune to the next highest
or next lowest receivable frequency.
Scan search
ț Starting scan search
̈ Select desired waveband.
̈ Press
SC
soft key.
SC
will appear in the display. The
radio briefly (approximately
8 seconds) tunes in all receivable
stations on the waveband selected.
ț Ending scan search
̈ Press
SC
soft key or G or H.
The station last played will be
selected and
SC
disappears from
the display.
Station memory
You can store ten AM and ten FM stations
in the memory.
ț Storing stations
̈ Tune in desired station.
̈ Press and hold desired station
button 1 to R until a brief
signal tone is heard.
The frequency is stored on the
selected station button.
ț Calling up stations
̈ Press desired station button 1
to R briefly.
i
If no station is received after two
consecutive scans of the complete frequency
range, then the scan stops at the frequency from
which it began.