Filter
Top Products
3-26 FUEL SYSTEM
Air Clean er
•
Remove:
Screw [A]
Carburetor Breather Tank [B]
Air Cleaner Housing [C]
Air Cleaner Housing Installation
•
Fit the projection [A] of the housing in the groove [ B] of
the joint duct [C] (front and rear), and tighten the clamp
screws.
•
Install:
Dust Seal [A]
Air Cleaner Housing Cover [B]
[C] Inside
•
Install the air cleaner housing and joint duct on the carbu-
retor.
•
Install:
Breather Hose and Clamp
Carburetor Breather Tank
•
Fit the joint duct on the fitting of the carburetor securely
and tighten the clamp screws.
•
Tighten the air cleaner housing bolts.
•
Install the spark arrester [A] so that the swelling faces
upward.