Filter
Top Products
SUSPENSION 14-17
Suspension Arms
Rear Lower Suspension Arm
•
Install the following parts as shown.
Front Side [A]:
Needle Bearing [B]
7.5 ±0.1 mm (0.295 ±0.004 in.) [C]
Rear Side [A]:
Circlip [B] (front side)
Ball Joint Bearing [C]
Circlip [D] (rear side)
Special Tool - Inside Circlip Pliers: 57001-143
•
Apply grease:
Oil Seal Lips
•
Install:
Sleeve (front side)
Collars (rear side)
Stabilizer Removal
•
Remove:
Rear Wheels (see Wheels/Tires chapter)
Stabilizer Joint [A]
○
Hold the joint bolt with an Allen wrench [B], and remove
the nut [C].
•
Remove:
Stabilizer Holder Bolts [ A]
Stabilizer Holders [B]
Dampers and Stabilizer [C]