Filter
Top Products
14-10 SUSPENSION
Shock Absorbers
Rear Shock Absorber Installation
•
Apply grease to the inside of bushing [A] and grease seal
lips [B].
•
Install:
Collar [C]
•
Install:
Bushing [ A] (press)
•
Tighten:
Torque - Rear Shock Absorber Mounting Nuts [B]: 34 N·m
(3.5 kgf·m, 25 ft·lb)
Rear Shock Absorber Inspection
•
Check the bushings [A] in the upper and lower pivots.
If bushings are worn, cracked, hardened, or otherwise
damaged, replace them.
Shock Absorber Spring Replacement
The spring replacements of front and rear shock ab-
sorbers are the same procedure.
The spring end of the rear shock absorber has a blue
paint.
•
Remove:
Shock Absorber (see Front or Rear Shock Absorber Re-
moval)
•
Use the spring compressor [A], and compress the spring
of the shock absorber.
Special Tool - Spring Compressor: 57001-1087