Filter
Top Products
CRANKSHAFT/T RANSMISSION 10-5
Exploded View
Torque
No. Fastener
N·m kgf·m ft·lb
Remarks
1 Grip Hold Nut 9.8 1.0 87 in·lb
2 Shift Lever Assembly Bracket Bolts 20 2.0 14
3 Tie-rod End Front Locknut 9.8 1.0 87 in·lb Lh
4 Tie-rod End Rear Locknut 9.8 1.0 87 in·lb
5 Tie-rod End Nut 20 2.0 14
6 Shift Lever Assembly Nut 20 2.0 14
7 Tie-rod E nd Bolt 9.8 1.0 87 in·lb
8 Shift Shaft Positioning Bolt 25 2.5 18
9 Shift Shaft Spring Bolt 25 2.5 18 L
10 Shift Shaft Cover Bolts 8.8 0.90 78 in·lb
11 Tie-rod End Locknut 20 2.0 14
12 Neutral Position Switch 15 1.5 11
13 ReversePositionSwitch 15 1.5 11
14. Do not apply a non-permanent locking agent to this end.
G: Apply grease.
L: Apply a non-permanent locking agent.
Lh: Left-hand Threads
M: Apply molybdenum disulfide grease.
MO: Apply molybdenum disulfide oil solution (mixture of the engine oil and molybdenum disulfide
grease in a weight ratio 10:1).
O: Apply engine oil.
R: Replacement Part