Filter
Top Products
PERIODIC MAINTENANCE 2-15
Periodic Maintenance Procedures
Choke Lever Free Play Adjustment
•
Remove:
Handlebar Cover Screws [A]
•
Remove:
Handlebar Cover Screws [A]
Handlebar Cover Front [B]
•
Loosen the locknut [A] of the choke cable.
•
Turn the adjuster [B] until the cable has proper amount of
play.
•
Tighten the locknut securely.
Idle Speed Inspection
•
Start the engine and warm it up thoroughly.
•
With the engine idling, turn the handlebar to both sides to
check for any changes in the idle speed.
If handlebar movement changes the idle speed, the t hrot-
tle cable may be improperly adjusted incorrectly routed,
or damaged. Be sure to correct any of these conditions
before riding.
WARNING
Operation with improperly adjusted, incorrectly
routed, or damaged cables could result in an un-
safe riding condition.
•
Check idle speed with a suitable tachometer.
If the idle speed is out of the specified range, adjust it (see
Idle Speed Adjustment).
Idle Speed
Standard: 1 150 ± 50 r/min (rpm)