Filter
Top Products
FUEL SYSTEM 3-17
Carburetor
•
Remove:
Screw [A]
Holder Plate [B]
Starter Plunger
Carburetor Installation
•
Confirm the groove of the carburetor holder [A] fits on the
projection [B] of the cylinder head.
•
Check fuel leakage from the carburetors.
WARNING
Fuel spilled from the carburetors is hazardous.
•
Adjust the idle speed (see Idle Speed Adjustment in Pe-
riodic Maintenance chapter).
•
Check the throttle cable ( see Throttle Lever Free Play In-
spection in Periodic Maintenance chapter).
Carburetor Disassembly
•
Remove the carburetors (see Carburetor Removal).
WARNING
Gasoline is extremely flammable and can be ex-
plosive under certain conditions. Turn the ignition
switch to OFF. D o not smoke. Make sure the area
is w ell-ventilated and free from any source of flame
or sparks; this includes any appliance with a p ilot
light.
NOTE
○
The carburetors can be disassembled in the joined
state.