Filter
Top Products
12-66 FIN AL DRIVE
Rear Final Gear Case
When installing a new pinion gear bearing holder [A], in-
stall the holder so that the no coating area [B] (one pitch
thread) faces gear case [C].
[D] Locking Agent Coating Area
•
Install:
Brake Cam shaft [A]
Spring [B]
•
Install:
Steel Balls [A]
•
Install:
Brake Cam Plate [A]
○
Fit the cam plate and brake camshaft [B] as shown.
•
Install:
Steel Plate [A] (P/No. 41080-1483, two holes)
Set Pins [ B] and S prings [C]