Filter
Top Products
12-38 FIN AL DRIVE
Front Final Gear Case
•
Remove:
Housing [A] and Differential Disc Assembly [B]
Inner Disc
Needle Bearing
•
Remove:
Cam Plate [A]
•
Remove:
Steel Balls [A]
Gasket [B]
Dowel Pins [C]
Front Final Gear Case Center Cover Bolts (M6) [D]
Front Final Gear Case Center Cover Bolts (M8) [E]
Front Final Gear Case Center Cover [F]
•
Remove:
Ring Gear Assembly [A]
Shim(s) [B]
•
Hold the front final gear case right cover [A] in a vise, and
remove the bearing holder using the socket wrench [B].
Special Tool - Socket Wrench, Hex 41: 57001-1484
○
If the holder seems too difficult to break free, apply heat
to softer the locking agent.
•
Remove:
Pinion Gear Bearing Holder