Filter
Top Products
1.3Chapter 1 Introduction
Locating Top, Bottom, and Back Panel Components
• Stylus: Use to tap icons and buttons on the screen, or enter data on the Graffiti
®
2 writing area. To use the stylus, remove it
from the side channel and hold it as you would a pen or pencil.
Top View
Stylus
External
Antenna
Connector
IR Port
GPS Antenna
(in down position
SD Input/Output
Expansion Card Slot
• External Antenna Connector: accepts a Garmin GA27C low profile remote automobile antenna.
• IR Port: Uses infrared technology to transmit and receive data to and from other iQue
™
or Palm OS
®
handheld units, and to
perform HotSync
®
operations. See “Beaming Information” in Chapter 8, and “IR HotSync Operations” in Chapter 9 for more
information.
• Expansion Card Slot: Accepts SD (Secure Digital) and MMC (Multimedia Card) expansion cards for flexible memory
storage and additional software, and SD input/output (SDIO) compatible devices such as wireless devices and digital
cameras.
Bottom View
Interface Connector
AC Charger
Connector
• AC Charger Connector: Connects to the AC wall charger for battery recharge only.
• Interface Connector: Connects your handheld to the cradle, which in turn connects to a USB port on your computer and to
the wall current through the AC adapter. This allows you to recharge your iQue handheld as well as update the information
between your handheld and the computer using HotSync technology.
NOTE: Before using the iQue 3200 for the first time, the battery must be charged for at least three full hours.
This unit contains a Lithium-Ion rechargeable battery. Please dispose of properly.
The cradle must be plugged into a USB port on your computer.
Your organizer requires a dedicated port. It cannot share a port with an internal modem or other device. If you are unsure about
the exact location of the USB port on your computer, refer to the user’s manual supplied with the computer.
Introduction: iQue Components