Filter
Top Products
10.4
Chapter 10 Setting Connection and Network Preferences
7. Tap the Connection pick list and select one. The list includes the configurations displayed in your Connection Prefer-
ences panel.
8. Tap the
Phone Number field to display the Phone Setup dialog box.
9. Enter the phone number you use to reach your ISP or dial-in server.
NOTE: MCI customers must enter the calling card number in the Phone # field, and the phone number in the
Use Calling Card field.
10. If you don’t need to enter a prefix, disable Call Waiting, or enter a calling card, tap OK.
To enter a prefix before the telephone number to access an outside line, tap the Dial Prefix check box, and enter
the prefix. (For example, many offices require that you dial “9” to dial a number outside the building.)
To turn off Call Waiting, tap the Disable call waiting check box to select it, and enter the code to turn off Call
Waiting. (If you don’t know the code, contact your local telephone company for the appropriate code.) Call Wait
-
ing can end your network session if you receive a call while you are connected.
To use a calling card to dial your ISP or dial-up service, tap the Use Calling Card check box. On the Use Calling
Card line, enter three commas. (Each comma delays transmission of your calling card number for two seconds, to
compensate for the delay before the number is entered.) Enter your calling card number.
11. When you have finished setting up your phone number, tap
OK.
Setting Network Preferences