Filter
Top Products
53
Getting Started
53
Reference
Main Menu
MapSource Info
MapSource Info
The MapSource Info Page displays a list of the MapSource data stored in the
unit and description of the highlighted list item. You can choose to ‘Show’ the
data on the map, by placing a checkmark in the ‘Show’ Box. To select/deselect a
box, place the highlight over the MapSource Item then press ENTER.
System Info
The System Info Page will show your software version number and the unit
ID number.
Setup Menu
The Setup Menu is arranged in an easy to use tab format. Each tab (General,
Time, Units, Location, Alarms, Interface) contains the settings that will determine
how the unit functions. To select a tab, the highlight must be on the tab name
then use the ROCKER Key (right/left) to scroll through the tabs. To select a data
fi eld on a tab, user the ROCKER Key (up/down) to highlight the selection then
press ENTER. To restore the GPSMAP to the factory settings for items on the tab,
press MENU and with ‘Restore Defaults’ highlighted press ENTER.
Setup Menu — ‘General’ Tab
The ‘General’ Tab contains settings for the Receiver Mode, WAAS, Backlight
Time Out, and Beeper. To change a setting highlight the fi eld then press ENTER.
Make your selection then press ENTER to activate the selection.
Mode —
The Mode selections are ‘Normal’, ‘Battery Saver’ and ‘Simulator’
‘Normal’ —
This is the default mode set from the factory. Use this setting
for best performance.
190-00230-00.indd 03/15/01, 9:26 AM53