Filter
Top Products
10
Interface Keys
IN —
The Zoom IN Key is used to decrease the map scale. When you decrease
the map scale, you will view a smaller area on the map with greater detail.
OUT —
The Zoom OUT Key is used to increase the map scale. When you
increase the map scale, you will view a larger area on the map with less
detail.
NAV / MOB —
The NAV Key is used to begin or stop navigation. If the
NAV Key is pressed and held down, the GPS stores the current location (a
man overboard point) and gives you the opportunity to begin immediate
navigation to that point.
PAGE —
The PAGE Key, will cycle you through the fi ve main display pages
in sequence. The PAGE Key will end an operation in progress and return
you to the main page.
—
The POWER Key is used to turn the unit on and off. To turn the
unit off press the POWER Key and hold it. The POWER Key is also used
to display the adjustment window for the backlight and contrast adjustment.
To activate the backlight/contrast adjustment window, with the unit on, press
and release the POWER Key.
MENU —
The MENU Key is used to display page option menus. If pressed
twice, the Main Menu will be displayed.
QUIT —
The QUIT Key, will cycle you through the fi ve main display pages
in reverse sequence. The QUIT Key will end an operation in progress and
display the previous page.
ENTER —
The ENTER Key is used to activate a data fi eld or confi rm a
selection. If the ENTER Key is pressed and held, the GPSMAP 76 will store
the current location and display the Mark Waypoint page.
ROCKER —
The ROCKER Key, located in the center of the keypad, is used to
control the Up/Down and Left/Right movement of the cursor on the display
pages and during data entry.
Getting Started
190-00230-00.indd 03/15/01, 9:24 AM10