Filter
Top Products
30
Getting Started
30
Reference
Setup Map — ‘Waypoint’ Tab
The ‘Waypoint ‘ Tab contains the Waypoint, and Active Route Waypoint
option settings. Each of the options has a ‘Text’ and ‘Zoom’ setting. To change
a setting, highlight the appropriate fi eld then press ENTER. Make your new
selection, then press ENTER to accept the selection.
Waypoints —
This option sets the display parameters for all waypoints.
Active Route Waypoint —
This option sets the display parameters for waypoints
that are in an Active Route. As an example, if you have selected ‘Small’ as
the text option for all waypoints, but selected ‘Large’ as the setting for Active
Route Waypoints, the waypoints included in an Active Route will be displayed
with large text on the Map Page.
Setup Map — ‘Point’ Tab
The ‘Point’ Tab contains the Navaids, Points of Interest, Geo, and Exit option
settings. Each of the options has a ‘Text’ and ‘Zoom’ setting. To change a
setting, highlight the appropriate fi eld then press ENTER. Make your new
selection, then press ENTER to accept the selection.
Navaids —
are items displayed on the Map that aid navigation. Navaids can be
landmarks, milemarkers, hazards, light houses, buoys etc.
Points of Interest —
include general business listings such as restaurants,
hotels, gas stations, etc..
Geo —
include points such as schools, cemeteries, churches, towers, glaciers,
parks, etc.
Exits —
includes exit information for the US and Canada.
Setup Map — ‘Waypoint’ Tab
Setup Map — ‘Point’ Tab
Map Page Options
190-00230-00.indd 03/15/01, 9:25 AM30