Filter
Top Products
17
Getting Started
Going to a waypoint:
1. Press the NAV Key.
2. Highlight ‘Go To Point’ then press the ENTER Key.
3. Highlight ‘Waypoints’ then press the ENTER Key.
4. Highlight ‘MAP 1’ then press the ENTER Key.
5. Highlight the Goto Button then press the ENTER Key.
The GPSMAP 76 is now navigating to the waypoint MAP 1.
For a GPS to navigate it has to be moving, fortunately you can simulate
movement in the GPSMAP 76. Press the PAGE Key until the Pointer Page is
displayed. Along the top of the Pointer Page there are several data fi elds, the
Speed Field is located in the upper left corner. To simulate movement, press the
ROCKER Key up one time. This will set a speed of 10 miles per hour. If you
continue to press or hold the ROCKER Key, the speed will increase in 10 mph
increments. For our purpose, 10 mph is fi ne.
On the Pointer Page are a Pointer and Compass Ring. The Pointer will always
point toward your destination (Bearing) while the Compass Ring refl ects the
direction that you are traveling (Track). In short, when you are headed directly
toward your destination, the Pointer will be pointed toward the top of the display,
aligned with the vertical line on the Compass Ring. If you are no longer heading
toward your destination, the Pointer will turn away from the top of the display
to point toward your destination. To get headed toward your destination again,
turn until the Pointer is realigned with the vertical line in the Compass Ring and
pointed toward the top of the display.
The simulator will let you change the Track so that you can see what will
happen. Press the ROCKER Key to the right until your Track has changed about
40°. This will simulate a direction change to the right. The Pointer should now
be pointed toward the left of the display indicating that you need to turn to
the left to head toward the waypoint. This is exactly what will happen during
actual navigation.
Basic Navigation
Selecting a waypoint for navigation
190-00230-00.indd 03/15/01, 9:25 AM17