Filter
Top Products
GPSMAP 176/176C Owner’s Manual 43
MAIN PAGES > MAP PAGE
Full screen map shown (with BlueChart data)
Distance and
Bearing
Pointer
Coordinates
Map Pointer
To measure the Bearing/Distance between two points:
1. From the Map page, press MENU. Highlight Measure
Distance and press ENTER. An on-screen pointer appears on
the map display at your present position.
2. Move the pointer to the desired reference point (the point that
you want to measure from) and press ENTER.
3. Move the pointer to the point you want to measure to. The
bearing and distance from the reference point and pointer
coordinates are displayed in the data window at the top of
the display.
4. Press QUIT to finish.
Page Layout Setup Options
Large
(1 Column)
Small
(1 Column)
Small
(2 Columns)
2 Columns
With Compass
To setup the page layout:
1. From the Map page, press MENU. Highlight Setup Page
Layout and press ENTER.
2. Select the desired option, None, Small (1 Column), Small
(2 Columns), 2 Columns With Compass, or Large (1 Column),
and press ENTER.