Filter
Top Products
GPSMAP 176/176C Owner’s Manual 25
BASIC OPERATION > GOING TO A DESTINATION
To stop navigation:
1. Press the NAV key.
2. Highlight Stop Navigation and press ENTER.
Selecting a Go To Graphically
A graphical Go To may be used to select one of three items from
the map display: an existing waypoint, an on-screen map feature,
such as roads, rivers, cities, and navaids, or a new map point. If you
are selecting a map item as a destination, the GPSMAP 176/176C
automatically uses the name of the map item, but the point is not
stored in the waypoint list. See page 13 for creating waypoints using
map features. If you are selecting a new map point as the Go To
destination, the GPSMAP 176/176C automatically creates or move a
waypoint named MAP at the pointer position.
To Go To a waypoint or map feature on the map:
1. Use the ROCKER key to highlight the waypoint or map item
on screen and press NAV.
2. Highlight Go To <waypoint name> and press ENTER.
Go To MAP Point allows you to navigate to a spot
on the map that is not a waypoint or map item.
To Go To a point on the map:
1. Move the map pointer to the desired position.
2. Press NAV, highlight Go To MAP Point, and press ENTER.