Filter
Top Products
GPSMAP 176/176C Owner’s Manual 27
BASIC OPERATION > GOING TO A DESTINATION
To save a track log:
1. From the Main Menu, use the ROCKER to highlight the Track
tab and then highlight the Active tab.
2. Select Save and press ENTER.
3. From the Save Back Through window, highlight the desired
time, date, or Entire Log and press ENTER. The track begins
saving and then displays the Save Track window when done.
The default name, distance, and number of points (500 max)
is displayed.
To change the name of the saved track, highlight the name
field and press
ENTER. Then make your changes and press
ENTER.
To display the track on the Map and Highway Pages, highlight
the check box to the left of Show on Map and Highway and
press ENTER.
To view the track on the map, highlight Review on Map and
press ENTER. Pressing MENU on this page activates the
options to Measure Distance (see page 43) and Point to on
Main Map, which exits the Save Track dialog. Press QUIT to
return to the Save Track dialog.
4. Highlight OK and press ENTER to save the track. Press QUIT
to exit.
To activate a TracBack using the NAV key:
1. Press NAV, highlight Navigate Track, and press ENTER.
2. Highlight the track you wish to navigate and press ENTER.
3. Choose either Original, which navigates from the start to the
end of your trip, or Reverse, which navigates from the end to
the start of your trip (TracBack) and press ENTER.
You must first save a track before using the Navigate Track
option.
If there are no saved tracks, the Navigate Track option is disabled.
Once a TracBack has been activated, the GPSMAP 176/176C takes
the track currently stored in memory and divides it into segments
called “legs.” Up to 50 temporary “turns” are created to mark the
most significant features of the track in order to duplicate your path as
closely as possible.