Filter
Top Products
18 GPSMAP 176/176C Owner’s Manual
BASIC OPERATION > CREATING AND USING WAYPOINTS
To change the Comment, Location, Coordinates,
Elevation, or Depth:
1. Highlight the desired field and press ENTER/MARK.
2. Use the ROCKER to edit/enter the data. To drop to the next
line, press to the Right on the ROCKER. Press ENTER/MARK
when done.
To change the distance/bearing from your current
location or another location:
1. To select a different location, highlight the field next to From,
select a location and press ENTER/MARK.
2. Highlight the distance and/or bearing field and use the
ROCKER to edit the data. Press ENTER/MARK when
finished. See “Projecting Waypoints” page 15.
You may also use the Waypoint Review and Waypoint Edit pages
to delete the selected waypoint, view the waypoint on the map, and
move the waypoint on the map. On the Waypoint Review/Waypoint
Edit page, use the ROCKER to highlight Delete and press ENTER/
MARK. With OK highlighted, press ENTER/MARK again to
confirm the deletion.
Waypoint Review page for a waypoint located on multiple map
features. The tabs only appear when BlueChart data is being used.
Moving a waypoint on the map.
(BlueChart map data shown.)