Filter
Top Products
GPSMAP 176/176C Owner’s Manual 21
BASIC OPERATION > CREATING AND USING WAYPOINTS
User Waypoints List Options
The following options are available by pressing MENU while
highlighting the Points tab, the User submenu, or one of the User
waypoint names:
Create Waypoint—creates a new waypoint. (See page 12.)
Delete Waypoint—deletes selected waypoint from list and any route
in which it was used.
Delete By Symbol—deletes all waypoints that use the same symbol.
Delete All
—deletes all waypoints from the unit.
NOTE: Once a waypoint is deleted from the list, it cannot be
recovered from the unit. It is advisable to backup important
waypoints to a computer using the optional PC cable and
interface software or write them down by hand.
To delete an individual waypoint from the User list:
1. Use the ROCKER to highlight the waypoint you want to delete.
2. Press MENU, then highlight Delete Waypoint and press
ENTER.
OR
Press ENTER, then highlight Delete and press ENTER.
3. Press ENTER to confirm.
To delete waypoints by symbol:
1. Highlight the waypoint you want to delete and press MENU.
Select Delete By Symbol and press ENTER.
2. Use the ROCKER to highlight the symbol of the waypoint(s) to
be deleted and press ENTER.
3. Press ENTER to confirm. Choose Cancel or press QUIT to
stop the deletion.
To delete all user waypoints:
1. Press MENU.
2. Highlight Delete All and then press ENTER.
3. Highlight OK and press ENTER to confirm.