Filter
Top Products
26
Light Timeout
The ‘LIGHT TIMEOUT’ option allows you to set the display backlight timeout (STAYS
ON, 15 or 30 seconds, and 1 or 2 minutes).
To change the light timeout:
1. From the SETUP Page press the UP or DOWN Button to highlight ‘DISPLAY’. Press the
OK Button to display the DISPLAY Page.
2. Press the UP or DOWN Button and highlight the ‘LIGHT TIMEOUT’ fi eld and press the
OK Button.
3. Press the UP or DOWN Button and highlight your selection and press the OK Button.
4. Press the PAGE Button to return to the SETUP Page.
Contrast
The ‘CONTRAST’ option allows you to adjust the display contrast.
To adjust the Display contrast:
1. From the SETUP Page press the UP or DOWN Button to highlight ‘DISPLAY’. Press the
OK Button to display the DISPLAY Page.
2. Press the UP or DOWN Button to highlight the ‘CONTRAST’ Slider and press the OK
Button.
3. Press the UP or DOWN Button to adjust the contrast.
4. Press the PAGE Button twice to return to the SETUP Page.
Setup Page
Display
The Light Timeout options
allow you to set the
backlight to stay on all the
time, but watch the battery
power!
Use the Display
Contrast Slider to
adjust the setting.
190-00297-01_0C.indd 26 10/2/2003, 1:41:18 PM