Filter
Top Products
24
Setup
Menu Page
The Setup Page allows you to customize the Geko 201. On the Setup Page you can
change coordinate systems, map datums, and distance units. You can also change the time
format, north reference, operating mode, display contrast, and back light timeout setting.
Time Page
The Time Page allows you to select a 12 hour or 24 hour time format, enter the proper
time zone, and choose Daylight Savings Time. When you select 12 hour time formatting, the
clock will read like a standard clock with 12 hour AM and 12 hour PM cycles. The 24 hour
option sets the Geko 201 to display a 24 hour cycle (Military Time).
To change the time format:
1. From the MENU Page press the UP or DOWN Button to highlight ‘TIME’ and press the
OK Button to display the TIME Page.
2. Press the UP or DOWN Button to highlight the ‘TIME FORMAT’ fi eld and press the OK
Button.
3. Press the UP or DOWN Button to highlight 12 or 24 hour and press the OK Button.
4. Press the PAGE Button to return to the page of your choice.
Time Zone
The time zone can be set to any one of the pre-programmed zones or by selecting
‘OTHER’ and then entering the UTC Time Offset value in the UTC offset fi eld.
To change the time zone:
1. From the MENU Page press the UP or DOWN Button to highlight ‘TIME’ and press the
OK Button to display the TIME Page.
2. Press the UP or DOWN Button and highlight the ‘TIME ZONE’ fi eld and press the OK
Button.
190-00297-01_0C.indd 24 10/2/2003, 1:41:17 PM