Filter
Top Products
GPSMAP 60CSx Owner’s Manual 75
MAIn Menu > heAdIng setuP - cAlIbrAtIon setuP
Heading Setup
Use the Heading Setup Page to specify the type of
heading display and the type of North reference used
to calculate your heading.
NOTE: Unless you have a working knowledge
of headings and North referencing, it is
recommended that you use the default values.
To access the Heading Setup Page:
On the Setup Menu Page, highlight the
Heading icon, and press ENTER.
• Display—sets the value (Cardinal Letters,
Degrees, or Mils) to show your heading.
• North Reference—
provides headings based
on a true, magnetic, grid, or specic user value
north reference.
• Switch to compass heading when below:
(for more than)—sets speed and time delay for
electronic compass switching. See page 49.
Calibration Setup
The Calibration Setup Page allows you to calibrate
the compass and altimeter for increased accuracy in
navigation.
To calibrate the compass:
1. On the Setup Menu Page, highlight the
Calibration icon, and press ENTER. The
“Which sensor would you like to calibrate?”
message appears.
2. Highlight the Compass button, and press
ENTER to open the Compass Calibration
Page. Follow the instructions on page 50.
To calibrate the Altimeter:
Highlight Altimeter and press ENTER to
display the Altimeter Calibration Page. Follow
the instructions on page 61.