Filter
Top Products
GPSMAP 60CSx Owner’s Manual 57
MAIn PAges > AltIMeter PAge
Plot Over Time or Distance
These two measurement options (changes over a set
period of time or changes over a set distance) apply
only to the View Elevation Plot option. The View
Pressure Plot option is measured by time and pressure
only.
Elevation over
Distance plot
Pressure over
Time plot
View Pressure or Elevation Plots
Select the View Elevation Plot option to plot a prole
of elevation changes that occur as you navigate over
a set distance or period of time. Select View Pressure
Plot to view a record of changes in barometric
pressure for a set period of time. When one option
is active, the other option is shown on the Options
Menu.
To view elevation or pressure plots:
1. Use the ROCKER to select the option you
want from the Altimeter Options menu, and
press ENTER to show the plot.
2. Adjust the time and distance measurement
using the Elevation Plot Zoom Ranges
explained on the pages that follow.
NOTE: To clear the plot and start again, you
must clear the Track Log.