Garmin 60CSx GPS Receiver User Manual


 
vi GPSMAP 60CSx Owner’s Manual
IntroductIon > cArIng for the gPsMAP 60csx
Caring for the GPSMAP 60CSx
The GPSMAP 60CSx case is constructed of
high-quality materials and does not require user
maintenance except cleaning.
Cleaning the Case
Clean the unit’s outer casing (except for the screen)
using a cloth dampened with a mild detergent solution
and then wipe dry. Avoid chemical cleaners and
solvents that may damage plastic components.
Cleaning the Screen
Clean the GPSMAP 60CSx screen using a soft,
clean, lint-free cloth. Use water, isopropyl alcohol,
or eyeglass cleaner if needed. If these are used, apply
the liquid to the cloth, and then gently wipe the screen
with the moistened cloth.
Storage
Do not store the GPSMAP 60CSx where prolonged
exposure to temperature extremes may occur (such as
in the trunk of a car) as permanent damage may result.
User information, such as waypoints and routes, are
retained in the unit’s memory without the need for
external power. It is always a good practice to back
up important user data by manually recording it or
downloading it to a PC (transferring it to MapSource
software).
Water Immersion
The GPSMAP 60CSx is waterproof to IEC Standard
60529 IPX7. It can withstand immersion in 1 meter
of water for 30 minutes. Prolonged submersion can
cause damage to the unit. After submersion, be certain
to wipe and air dry the unit before reuse or charging.