Filter
Top Products
54 GPSMAP 60CSx Owner’s Manual
MAIn PAges > coMPAss PAge
0.25
mi
The Course Pointer indicates your course of travel from
your original location and the distance off course.
Scale
To select the course pointer or the bearing
pointer:
1. Press MENU to open the Compass Page
Options menu. The bearing pointer is the
factory set default option. When the bearing
pointer option is shown, the course pointer is
active and vice versa.
2. Highlight this option, and press ENTER.
Data Fields
You can show two wide, three or four data elds on
the Compass Page.
3 Data Fields 4 Data Fields
To show data elds on the Compass Page:
1. Press MENU to open the Compass Page
Options Menu.
2. Highlight Data Field, and press ENTER. The
Show sub-menu appears.
3. Select the number of data
elds you want to show on the
Compass Page and press ENTER.