Filter
Top Products
cf Que
™
1620
GPS Applications
-24-
Customizing Route Navigation
You can use the Route Preferences, Detour, Edit Vias, and Recalculate options to
customize route navigation to meet your requirements. To determine the way a route
is calculated, whether or not some routing features are implemented automatically,
modified or turned Off, you can use the System Setup and Routing options from the
Main Menu on the Map Page. A set of factory default preferences will operate route
navigation if you do not choose to make your own settings.
To set General Preferences:
1. From the Map Page, tap Menu then System Setup to display the General
Preferences Page.
2. Under Voice Prompt options, tap Guidance and GPS Status if you
want guidance prompts and GPS status information. Tap Guidance
Only if you want prompts for routes only and tap Manual Speak Only
if you only want prompts and status when you press a hard button.
3. On the same page under Attention Tone, tap Attention Tone to place a
check mark next to this option to present a tone to prepare you to listen
before each voice prompt. See notes on inside cover of this guide about
voice prompts and speaker volume of your particular Pocket PC
To set Routing Preferences:
1. On the “Routing” preferences page, under Route Preference, tap Faster
Time, Shorter Distance, Off Road or Custom. If you want this option
to display every time you begin a route, tap “Ask Me My Preferences”
to place a check mark next to it. When the checked, this option displays
the route preference pop-up window before a route is calculated.
2. Next is the Calculate Routes For: option. Tap the displayed option to
open the list of modes of travel and select the most appropriate.
3. If you selected Custom from the Route Preference options, you can
improve the accuracy of the route calculation by adjusting the speed
assumption for the types of roadways on a route.
4. Tap the Customize button to display a page with an adjustment slider
for three roadway categories, place the stylus on the slider and drag in
the direction desired.
Note that increases and decreases represent a range of approximately
plus and minus 90%.
5. To use settings from previous driving, tap Use Habits, to reset all three
categories, tap the Reset button.
To set Guidance Preferences:
1. On the “Guidance” preferences page, under Off-Route Recalculation,
tap Prompted, Automatic (Announced or Silent) or Off.
2. For Next Turn Pop-up options, tap Off, SPEAK Button Only,
Automatic Only, or Both.
Routes
General Preferences
Guidance Preferences
Routing
Preferences
Road Speed
Adjustment Page