Filter
Top Products
cf Que
™
1620
Avoidance Settings
You can select specific sections of roads and define areas to avoid when calculating
a route. This helps you to avoid road construction, heavy traffic areas, etc.
To select roads and areas to avoid:
Refer to page 25 for detailed instructions.
Units Settings
You can choose a unit of measure for Distance and Speed, Direction, Elevation
and Depth.
To set the Units of Measure:
1. Tap the desired unit of measure for each type of measurement shown.
Buttons Settings
You can select hard buttons on the
unit to perform specific Que Application
functions.
To map system features to device
hard buttons:
Refer to page 33 for detailed
instructions.
Language Settings
You can choose a specific language for voice messages and prompts. The avail-
able languages are displayed on a drop-down menu.
To select a language for Voice:
1. Tap the language fi eld to display the list of available languages.
2. Tap the desired language to both select the language and close the list.
3. To remove a language from the list, tap the “Delete Voice Language”
button with the language highlighted on the list.
Buttons Mapping
Page
GPS Applications
-11-
System Setup
Language Selection Page
Units Settings Page
Avoid Roads/Areas Page