Filter
Top Products
GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. H
5-14
SECTION 5
FLIGHT PLANS
Shortcuts
A number of shortcuts are available to save time when
using the Active Flight Plan Page. These shortcuts speed
the process of removing approaches, departures and
arrivals, and aid in selecting a specific flight plan leg for
navigation guidance.
On the preceding page, options to remove approaches,
departures, and arrivals were introduced. This process
may also be completed using the CLR Key, described as
follows.
Removing an approach, departure or arrival
using the CLR Key:
1) With the Active Flight Plan Page displayed,
press the small right knob to activate the
cursor.
2) Turn the large right knob to highlight the title
for the approach (Figure 5-32), departure, or
arrival to be deleted. Titles appear in light blue
directly above the procedure’s waypoints.
Figure 5-32 Highlight Item To Be Deleted
3) Press the CLR Key to display a confirmation
window (Figure 5-33).
Figure 5-33 Remove Approach Window
4) With ‘Yes?’ highlighted, press the ENT Key to
remove the selected procedure.
This same process may also be used to remove
individual waypoints from the active flight plan.
Removing a waypoint using the CLR Key:
1) With the Active Flight Plan Page displayed,
press the small right knob to activate the
cursor.
2) Turn the large right knob to highlight the
identifier for the waypoint to be deleted.
Identifiers appear in green text.
3) Press the CLR Key to display a confirmation
window (Figure 5-34).
Figure 5-34 Remove Waypoint Window
4) With ‘Yes?’ highlighted, press the ENT Key to
remove the selected procedure.