Filter
Top Products
GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. H
7-3
SECTION 7
WPT PAGES
Duplicate Waypoints
Once the identier, facility name, or location is
entered, all six airport pages display information for the
selected airport. When entering an identier, facility
name, or location, the GNS 530’s Spell’N’Find feature
scrolls through the database, displaying those waypoints
matching the characters that have been entered to that
point. If duplicate entries exist for the entered facility
name or location, additional entries may be viewed
by continuing to turn the small right knob during the
selection process. If duplicate entries exist for an entered
identier, a Duplicate Waypoint Window appears when
the identier is selected (by pressing the ENT Key).
Selecting a facility name or location where
duplicate entries exist:
1) Select the desired facility name or location,
following the preceding steps under ‘To enter
a waypoint facility name or city location’.
2) When spelling the facility name or location,
using the small and large right knobs, the GNS
530’s Spell’N’Find feature selects the first entry
(Figure 7-4) in the database based upon the
characters entered up to that point.
Figure 7-4 First Facility for Charlotte
3) Continue turning the small right knob to
scroll through any additional database listings
(Figure 7-6) for the selected facility name or
location. Scroll backwards with the small right
knob if the desired facility name or location
has been scrolled past.
Figure 7-5 Last Facility for Charlotte
4) Press the ENT Key to select the desired facility
name or location.
5) To remove the flashing cursor, press the small
right knob.