Garmin 530(A) GPS Receiver User Manual


 
GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. H
7-23
SECTION 7
WPT PAGES
4) Press the small right knob to return to the
User Waypoint Page.
Deleting a user waypoint:
1) Select the desired waypoint on the User
Waypoint Page and press the MENU Key to
display the User Waypoint Page Menu.
2) Turn the large right knob to highlight ‘Delete
User Waypoint?’ (Figure 7-45) and press the
ENT Key.
Figure 7-45 User Waypoint Page Menu
3) Press the CLR Key to display a ‘delete waypoint’
confirmation window.
4) With ‘Yes?’ highlighted, press the ENT Key to
delete the selected user waypoint.
User Waypoint List
The User Waypoint List (Figure 7-46) allows the
pilot to review, modify, rename, or delete a selected user
waypoint, or to delete all user waypoints currently stored
in memory. The top of the page shows the number of
waypoints used and available memory.
Reviewing and/or modifying a user
waypoint from the User Waypoint List:
1) Select the User Waypoint List, as described in
this section.
2) Turn the large right knob to highlight the
desired user waypoint (Figure 7-46).
Figure 7-46 User Waypoint List Page
3) Press the ENT Key to display the User Waypoint
Page for the selected waypoint. From this page
the pilot may review all information defining
the waypoint and its position.
4) To modify the waypoint’s position or reference
waypoint information, follow the preceding
steps described in this section.
5) To exit the User Waypoint Page, turn the large
right knob to highlight ‘Done?’ and press the
ENT Key.