Filter
Top Products
11. CUSTOMIZING YOUR UNIT
11-3
11.2 DISPLAY OPTIONS
menu
This menu, consisting of two pages, display
setup1 and display setup 2, contains items
for setting up the plotter and video sounder
displays.
1. Press the [MENU] key.
2. Press the DISPLAY OPTIONS soft key.
The display setup1 menu appears.
DGPS 3D
DISPLAY
SETUP1
RETURN
EDIT
RNG & BRG MODE
RANGE/SPEED UNIT
DEPTH UNIT
TEMP UNIT
LAT/LON DISPLAY
TIME DISPLAY
WAYPOINTS SW
COURSE VECTOR
BEARING
MAG VARIATION
TD DISPLAY
POSITION DISPLAY
SET GO TO METHOD
OPERATION MODE
LANGUAGE
RHUMB LINE
nm / kt
ft
°F
DD°MM.MMM'
24 HOUR
AUTO2
LINE
MAGNETIC
AUTO 01.3°E
LORAN C
LAT/LON
1 POINT
PLEASURE
ENGLISH
NEXT
PAGE
Display setup 1 menu
DISPLAY SETUP 1 menu description
RNG & BRG MODE
The GPS receiver calculates the range,
bearing, cross track error (XTE) and ETA to
TO waypoint when you set a destination.
The range and bearing can be calculated by
GREAT CIRCLE (straight line between two
points) or RHUMB LINE (straight line
between two points on nautical chart)
method.
RANGE/SPEED UNIT
Selects the unit for range and speed; nm/kt,
km/ km/h, sm/ sm/h.
DEPTH UNIT
Selects unit of depth measurement among
feet, fathoms, and meters.
TEMP UNIT
Selects unit of water temperature
measurement between Celsius and
Fahrenheit.
LAT/LON DISPLAY
Displays the minutes of latitude and
longitude positions in hundredths,
thousandths or ten thousandths.
TIME DISPLAY
Selects time display format for 12 hour or 24
hour.
WAYPOINT SW
Provides automatic or manual waypoint
switching when following a route. For further
details, see page 8-5.
COURSE VECTOR
You may extend a line from the own ship
position to show ship’s course. The line can
be a vector (the length depends on the ship’s
speed) or course bar (course bar).
BEARING
A navigation device outputs both true and
magnetic bearings. A magnetic bearing is
true bearing plus (or minus) earth’s magnetic
deviation. Thus the equation for finding
magnetic bearing is;
true bearing
±x (magnetic variation)° =
magnetic bearing
You can display your ship’s course and
bearing to waypoint in true or magnetic
bearing.