Filter
Top Products
7. ROUTES
7-3
7.3 Inserting, Removing
Waypoints
Inserting waypoints through the route
list
Waypoints can be inserted in routes as
follows:
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Select a route by pressing ▲ or ▼.
3. Press the EDIT ROUTE soft key. The
route name screen appears.
4. Press the LOCAL LIST soft key. All
waypoints in the route are displayed.
DGPS 3D
EDIT
ROUTE
INSERT
WPT
REMOVE
WPT
COORD
TYPE
RETURN
RETURN
ROUTE NAME: ABCDEF
COMMENT: ABCDEFGHIJKL
WPT001
34 .12.345'N
135 .54.321'W
01
WPT002
34 .23.456'N
136 .10.255'W
02
WPT004
35 .22.878'N
136 .44.333'W
04
WPT003
35 .11.222'N
136 .55.889'W
03
WPT005
34 .15.279'N
135 .34.111'W
05
LEG
204.8
33.83nm
22.0
34.27nm
35.1
2.89nm
125.6
31.25nm
CHANGE
WPT
Edit route menu
5. Press ▲ or ▼ to place the cursor at the
location where you want to insert a
waypoint.
6. Press the INSERT WPT soft key to show
the waypoint list.
DGPS 3D
EDIT
ROUTE
SELECT
WPT
COORD
TYPE
LOCAL
LIST
ALPH
LIST
RETURN
CANCEL
ROUTE NAME: ABCDEF
COMMENT: ABCDEFGHIJKL
WPT001
34 .12.345'N
135 .54.321'W
01
WPT002
34 .23.456'N
100136 .10.255'W
02
WPT004
35 .22.878'N
136 .44.333'W
04
WPT003
35 .11.222'N
136 .55.889'W
03
WPT005
34 .15.279'N
135 .34.111'W
05
LEG
204.8
33.83nm
22.0
34.27nm
35.1
2.89nm
125.6
31.25nm
LOCAL LIST
001
002
003
004
WPT010
WPT011
WPT012
WPT013
Waypoint list for editing a route (Local list)
7. Press ▲ or ▼ to select the waypoint you
want to insert. You can switch between
the local list and alphanumeric list by
pressing the LOCAL LIST or ALPH LIST
soft key.
8. Press the SELECT WPT soft key.
Changing waypoints through the list
Waypoints used in a route can be changed
with others.
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Select a route by pressing ▲ or ▼.
3. Press the EDIT ROUTE soft key. The
route name screen appears.
4. Press the LOCAL LIST soft key.
5. Select the waypoint which you want to
change (remove).
6. Press the CHANGE WPT soft key to
show the local list.
7. Select the waypoint which you want to
change (insert).
8. Press the CHANGE WPT soft key to
change the waypoint.
9. Press the [PLOT] key.